Buy on Etsy → — ships from our Etsy shop with Etsy buyer protection and reviews.
Windshield Pillar • Tailgate • Roof Section
Fits C30 • S40 • S80 • V50 • V60 • XC60 • XC70 • XC90 (2001–2026)
OEM Reference: 8616645 or "Yellow Tim Clip"
One of the most versatile interior clips in the entire Volvo catalog, this trim pin is used across multiple body sections — the windshield pillar, tailgate/trunk trim, and roof‑section trim — and across a massive range of models and years.
If your interior trim is loose, rattling, or missing fasteners, this 10‑pack gives you exactly what you need for a clean, OEM‑tight refresh.
Printed in PETG Black for durability, heat resistance, and long‑term interior use.
🔧 Features
🧩 Multi‑fit interior trim pin used in pillar, roof, and tailgate applications
🚗 Confirmed fitment: C30, S40, S80, V50, V60, XC60, XC70, XC90 (2001–2026)
📦 Pack of 10 — ideal for most repairs
🔥 PETG Black — strong, heat‑resistant, interior‑safe
🔩 OEM Reference: Volvo 8616645
Made to order in Chattanooga, TN
⚡ Quick Install Instructions (with Icons)
(These steps follow standard Volvo interior trim‑pin replacement.)
1️⃣ Remove the trim panel
Gently pull the pillar, roof, or tailgate trim away from the body. Old clips may fall out or remain stuck.
2️⃣ 🧹 Clear out broken OEM pins
Remove any cracked or brittle factory clips from the mounting holes.
3️⃣ 🔩 Insert new PETG trim pins
Press each pin firmly into the trim panel until fully seated.
4️⃣ 🎯 Align panel with mounting holes
Line up each clip with its corresponding hole in the body.
5️⃣ 🤜 Press panel back into place
Push along the length of the trim until all pins lock in securely.
6️⃣ ✔️ Final check
Ensure the panel sits flush and doesn’t rattle.
📌 Notes
This clip is used across three major trim areas — windshield pillar, roof section, and tailgate — making it one of Volvo’s most universal interior fasteners.
PETG provides improved durability over brittle OEM plastic.
Disclaimer: This is not an OEM (Original Equipment Manufacturer) part. It is a 3D-printed reproduction designed to replicate the fit and function of the original component. As a reproduction, it may have some differences from the OEM part in feel, sound, fit, or overall finish. Minor adjustments may be needed during installation, and normal care should be taken when installing or removing the part, as it may not have the exact same strength or flexibility as the factory original. By purchasing, you acknowledge this is a reproduction part and not a genuine manufacturer component.
Buy on Etsy → — ships from our Etsy shop with Etsy buyer protection and reviews.
Windshield Pillar • Tailgate • Roof Section
Fits C30 • S40 • S80 • V50 • V60 • XC60 • XC70 • XC90 (2001–2026)
OEM Reference: 8616645 or "Yellow Tim Clip"
One of the most versatile interior clips in the entire Volvo catalog, this trim pin is used across multiple body sections — the windshield pillar, tailgate/trunk trim, and roof‑section trim — and across a massive range of models and years.
If your interior trim is loose, rattling, or missing fasteners, this 10‑pack gives you exactly what you need for a clean, OEM‑tight refresh.
Printed in PETG Black for durability, heat resistance, and long‑term interior use.
🔧 Features
🧩 Multi‑fit interior trim pin used in pillar, roof, and tailgate applications
🚗 Confirmed fitment: C30, S40, S80, V50, V60, XC60, XC70, XC90 (2001–2026)
📦 Pack of 10 — ideal for most repairs
🔥 PETG Black — strong, heat‑resistant, interior‑safe
🔩 OEM Reference: Volvo 8616645
Made to order in Chattanooga, TN
⚡ Quick Install Instructions (with Icons)
(These steps follow standard Volvo interior trim‑pin replacement.)
1️⃣ Remove the trim panel
Gently pull the pillar, roof, or tailgate trim away from the body. Old clips may fall out or remain stuck.
2️⃣ 🧹 Clear out broken OEM pins
Remove any cracked or brittle factory clips from the mounting holes.
3️⃣ 🔩 Insert new PETG trim pins
Press each pin firmly into the trim panel until fully seated.
4️⃣ 🎯 Align panel with mounting holes
Line up each clip with its corresponding hole in the body.
5️⃣ 🤜 Press panel back into place
Push along the length of the trim until all pins lock in securely.
6️⃣ ✔️ Final check
Ensure the panel sits flush and doesn’t rattle.
📌 Notes
This clip is used across three major trim areas — windshield pillar, roof section, and tailgate — making it one of Volvo’s most universal interior fasteners.
PETG provides improved durability over brittle OEM plastic.
Disclaimer: This is not an OEM (Original Equipment Manufacturer) part. It is a 3D-printed reproduction designed to replicate the fit and function of the original component. As a reproduction, it may have some differences from the OEM part in feel, sound, fit, or overall finish. Minor adjustments may be needed during installation, and normal care should be taken when installing or removing the part, as it may not have the exact same strength or flexibility as the factory original. By purchasing, you acknowledge this is a reproduction part and not a genuine manufacturer component.
Image 1 of 5
Image 2 of 5
Image 3 of 5
Image 4 of 5
Image 5 of 5