Buy on Etsy → — ships from our Etsy shop with Etsy buyer protection and reviews.
Fits P1 • P2 • P3 Platforms | S40 • S60 • S80 • V50 • V70 • C30 • C70 • XC70 • XC90
OEM Reference: 9158430
One of the broadest‑fitting clips in the entire Volvo lineup, this cargo‑area fastener appears across three full platform generations — P1, P2, and P3. If your trunk trim is loose, rattling, or missing clips, this 4‑pack gives you everything needed for a clean, OEM‑tight refresh.
Printed in PETG Black for durability, heat resistance, and long‑term interior use.
🔧 Features
🧩 Wide‑fit compatibility across P1, P2, and P3 Volvos
(S40, S60, S80, V50, V70, C30, C70, XC70, XC90)
📦 Pack of 4 — enough for a full trunk/cargo panel refresh
🔥 PETG Black — strong, heat‑resistant, ideal for interior trim
🔩 OEM Reference: Volvo 9158430
Made to order in Chattanooga, TN
⚡ Quick Install Instructions
(These instructions are based on standard Volvo cargo‑trim clip replacement.)
1️⃣ Remove the cargo trim panel
Gently pull the panel away from the trunk wall. Old clips may fall out or remain stuck.
2️⃣ 🧹 Clear out broken OEM clips
Remove any cracked or brittle factory clips from the mounting holes.
3️⃣ 🔩 Insert new PETG clips
Press each clip firmly into the trim panel until fully seated.
4️⃣ 🎯 Align panel with mounting holes
Line up each clip with its corresponding hole in the body.
5️⃣ 🤜 Press panel back into place
Push along the length of the trim until all clips lock in securely.
6️⃣ ✔️ Final check
Ensure the panel sits flush and doesn’t rattle.
📌 Notes
This clip is one of the most universal cargo‑area fasteners in the Volvo lineup — confirmed across three platform generations.
PETG provides improved durability over brittle OEM plastic.
Disclaimer: This is not an OEM (Original Equipment Manufacturer) part. It is a 3D-printed reproduction designed to replicate the fit and function of the original component. As a reproduction, it may have some differences from the OEM part in feel, sound, fit, or overall finish. Minor adjustments may be needed during installation, and normal care should be taken when installing or removing the part, as it may not have the exact same strength or flexibility as the factory original. By purchasing, you acknowledge this is a reproduction part and not a genuine manufacturer component.
Buy on Etsy → — ships from our Etsy shop with Etsy buyer protection and reviews.
Fits P1 • P2 • P3 Platforms | S40 • S60 • S80 • V50 • V70 • C30 • C70 • XC70 • XC90
OEM Reference: 9158430
One of the broadest‑fitting clips in the entire Volvo lineup, this cargo‑area fastener appears across three full platform generations — P1, P2, and P3. If your trunk trim is loose, rattling, or missing clips, this 4‑pack gives you everything needed for a clean, OEM‑tight refresh.
Printed in PETG Black for durability, heat resistance, and long‑term interior use.
🔧 Features
🧩 Wide‑fit compatibility across P1, P2, and P3 Volvos
(S40, S60, S80, V50, V70, C30, C70, XC70, XC90)
📦 Pack of 4 — enough for a full trunk/cargo panel refresh
🔥 PETG Black — strong, heat‑resistant, ideal for interior trim
🔩 OEM Reference: Volvo 9158430
Made to order in Chattanooga, TN
⚡ Quick Install Instructions
(These instructions are based on standard Volvo cargo‑trim clip replacement.)
1️⃣ Remove the cargo trim panel
Gently pull the panel away from the trunk wall. Old clips may fall out or remain stuck.
2️⃣ 🧹 Clear out broken OEM clips
Remove any cracked or brittle factory clips from the mounting holes.
3️⃣ 🔩 Insert new PETG clips
Press each clip firmly into the trim panel until fully seated.
4️⃣ 🎯 Align panel with mounting holes
Line up each clip with its corresponding hole in the body.
5️⃣ 🤜 Press panel back into place
Push along the length of the trim until all clips lock in securely.
6️⃣ ✔️ Final check
Ensure the panel sits flush and doesn’t rattle.
📌 Notes
This clip is one of the most universal cargo‑area fasteners in the Volvo lineup — confirmed across three platform generations.
PETG provides improved durability over brittle OEM plastic.
Disclaimer: This is not an OEM (Original Equipment Manufacturer) part. It is a 3D-printed reproduction designed to replicate the fit and function of the original component. As a reproduction, it may have some differences from the OEM part in feel, sound, fit, or overall finish. Minor adjustments may be needed during installation, and normal care should be taken when installing or removing the part, as it may not have the exact same strength or flexibility as the factory original. By purchasing, you acknowledge this is a reproduction part and not a genuine manufacturer component.
Image 1 of 10
Image 2 of 10
Image 3 of 10
Image 4 of 10
Image 5 of 10
Image 6 of 10
Image 7 of 10
Image 8 of 10
Image 9 of 10
Image 10 of 10